Checking The Memory Capacity - Fujitsu LifeBook S7220 User Manual

3
While holding the clips out,
remove the module from the
slot by lifting it up and pulling it
away from your notebook.
4
Store the memory upgrade
module in a static guarded
sleeve.
5
Replace the cover and reinstall
the screws.

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your notebook has recognized the change.
Windows XP: Check the memory capacity by clicking [Start] > Settings > Control Panel > System.
Select the General tab and check the amount of memory above the [Support Information] button.
Windows Vista: Check the memory capacity by clicking [Start] -> Control Panel -> System and
Maintenance -> System. The amount of memory is displayed next to Memory - RAM. (If you are in
Classic View, access the System icon directly from the Control Panel.)
There may be a variation between the actual memory size and what is displayed. This is possible if your
system is configured with an integrated graphics media accelerator which dynamically allocates system
memory to accelerate graphics performance.
I
F THE TOTAL MEMORY DISPLAYED IS INCORRECT
PROPERLY INSTALLED
CORRECTLY RECOGNIZED
3
Retaining Clip
1
Figure 24. Removing a Memory Upgrade Module
,
. (I
F THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT
, T
SEE ROUBLESHOOTING ON PAGE
81
2
CHECK THAT YOUR MEMORY UPGRADE MODULE IS
86.
1
Retaining Clip