Table of Contents
Advertisement
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. (See
Navigating Through The Setup Utility on page 2 for more
information.)
Information
Quick Boot
Diagnostic Screen
Boot Menu
PXE Boot to LAN
Boot Device Priority
Hard Disk Drive
CD/DVD-ROM Drive
Network Boot Device
Table 13: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
QuickBoot
■
Disabled
Enabled
■
Diagnostic Screen
Disabled
■
■
Enabled
Boot Menu
Disabled
■
■
Enabled
PXE Boot to LAN
■
Disabled
Enabled
■
InsydeH20 Setup Utility
Main
Advanced
Security
<Enabled>
<Disabled>
<Enabled>
<Enabled>
Figure 13. Boot Menu
Default
Description
[Enabled]
Turns on and off booting with a truncated set of Power On Self Test.
(Fewer tests mean faster turn on.)
[Disabled]
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
[Enabled]
This field is not active unless the Supervisor's Password has been set.
When disabled, access to the Boot Menu with the [F12] key is dis-
abled. When enabled, the Boot Menu is enabled and the [F12] key will
allow you to display it..
[Enabled]
Turns on and off the preboot execution environment feature.
B o o t M e n u
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
Boot
Exit
[Disabled]
All Diagnostic Tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
Up/Dn Select Boot Device
<>
Select Screen
Select Item
Enter Select
F1 = Help
F9 = Setup Defaults
F10 = Save and Exit
Esc = Exit
Submenu
19
Advertisement
Table of Contents
