Table of Contents
Advertisement
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features. Note that hard disk security cannot be
set without having entered a Supervisor passord.
Information
[Hard Disk Security]
Drive0 Password:
Set Drive0 Password
Password Entry on Boot
Table 11: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
---
Drive0 Password Is:
Set Drive0
---
Password:
■
Password Entry
Disabled
on Boot:
■
Enabled
InsydeH20 Setup Utility
Main
Advanced
Security
Clear
<Enabled>
Figure 11. Hard Disk Security Submenu
Default
Description
Clear
The default is Clear. When the Drive0 Password has been set in the field below, the
field changes to Set.
[Enter]
When the Drive0 Password has been set, the field can be changed. When enabled,
the hard disk is locked with the password. Data in the locked disk cannot be read on
any systems other than the original system on which it is locked or systems that
have the identical password setting.
[Enabled]
When disabled, the master password entry is not required before booting the oper-
ating system, but the hard disk is still password-protected without password entry.
S e c u r i t y M e n u
Boot
Exit
Press <Enter> key to set
Hard Disk Password. The
hard disk is locked
with the password. Data
in the locked disk
<Enter>
cannot be read on other
systems.
Up/Dn Select Boot Device
<>
Select Screen
Select Item
Enter Select
F1 = Help
F9 = Setup Defaults
F10 = Save and Exit
Esc = Exit
Submenu
17
Advertisement
Table of Contents
