Boot Menu - Selecting The Operating System Source - Fujitsu Lifebook P770 Bios Manual

L i f e B o o k P S e r i e s B I O S
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.)
Info
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment: [Enabled]
Boot Device Priority
F1 Help
ESC Exit
Table 19: Fields, Options and Defaults for the Boot Menu
Menu Field
Note that the Boot menu can be set up or modified only after a Supervisor password has been set up.
Boot-time
Diagnostic Screen:
Boot Menu:
Preboot Execution
Environment:
Boot Device Priority
26
Phoenix SecureCore(tm) Setup Utility
System Advanced
-/Space
Select Item
Select Menu Enter
Options Default
■
Disabled [Disabled]
■
Enabled
■
Disabled [Enabled]
■
Enabled
■
Disabled [Enabled]
■
Enabled
— —
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
Security Boot
[Disabled]
[Enabled]
Change Values
Select Sub-Menu
Figure 19. Boot Menu
Description
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
When Disabled, the Boot Menu is disabled and the [F12] key is
ignored during Power On Self Test. When Enabled, the Boot Menu
is enabled.
Turns on and off the preboot execution environment feature.
This menu allows setting up the source for the operating system.
See "The Boot Device Priority Submenu" in the following section.
Exit
Item Specific Help
[Disabled]
Display the logo screen
during boot.
[Enabled]
Display the diagnostic
screen during boot.
F9 Setup Defaults
F10 Save and Exit