TP-Link TL-WR710N User Manual page 34

Repeater Mode - In Repeater mode, the wireless repeater relays signal between its
stations and the root AP for greater wireless range.
•
Universal Repeater - In Repeater mode, the AP with WDS disabled will relay data to
an associated root AP. AP function is enabled meanwhile.
•
WDS Repeater - In WDS Repeater mode, the AP with WDS enabled will relay data to
an associated root AP. AP function is enabled meanwhile.
Wireless Name of Root AP - The SSID of AP that you want to access.
MAC Address of Root AP - The MAC address of AP that you want to access.
Survey - Click this button, you can search the AP which runs in the environment.
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the Router can be used. It may be illegal to use the wireless
function of the Router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.
Wireless Security Mode - This option should be chosen according to the security
configuration of the AP you want to access. It is recommended that the security type is
the same as your AP's security type.
TL-WR710N 150Mbps Wireless N Mini Pocket Router
Figure 3-14 Quick Setup - Wireless
- 20 -