TP-Link TL-WR710N User Manual page 38

TL-WR710N 150Mbps Wireless N Mini Pocket Router
PPPoE - For this connection, you will need your account name and password from your
ISP.
If you have applied ADSL to realize Dial-up service, you should choose this type. Under
this condition, you should fill in both the User Name and Password that the ISP supplied.
Please note that these fields are case-sensitive.
Figure 3-21 Quick Setup - PPPoE
Dynamic IP - Your ISP uses a DHCP service to assign your Router an IP address for
connecting to the Internet. When the Router connects to a DHCP server, or the ISP
supplies you with DHCP connection, please choose this type. If you choose this type of
connection, no configuration should be set and you can go on with the wireless
configuration in Figure 3-23 .
Static IP - This type of connection uses a permanent, fixed (static) IP address that your
ISP assigned. In this type, you should fill in the IP address, Subnet Mask, Default
Gateway, and DNS IP address manually, which are specified by your ISP. Then click
Next and proceed to Figure 3-23.
Figure 3-22 Quick Setup - Static IP
2. You can configure the basic settings for the wireless network on this page.
- 24 -