Network; Lan - TP-Link TL-WR710N User Manual

WISP Client Router - In this mode, the device enables multiple users to share Internet
connection from WISP.

6.5 Network

Figure 6-4 the Network menu
There is only one submenu under the Network menu (shown in Figure 6-4): LAN.

6.5.1 LAN

Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on
the screen as below.
MAC Address - The physical address of the LAN ports, as seen from the LAN. The value
can't be changed.
Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP
to config IP address manually.
IP Address - Enter the IP address of your system in dotted-decimal notation (factory default -
192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
IGMP Proxy - The Internet Group Management Protocol(IGMP) feature allows your devices
in LAN can watch TV.
Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically，while the Virtual Server and
DMZ Host will not take effect until they are re-configured.
TL-WR710N 150Mbps Wireless N Mini Pocket Router
Figure 6-5 LAN
- 139 -