Product Hardware Features - TRENDnet TEW-811DRU User Manual

TRENDnet User's Guide
*For maximum performance of up to 867 Mbps use with a 867 Mbps 802.11ac wireless
adapter
**Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions
*** Printer Control Center utility installation required for each computer in order to
access the printer

Product Hardware Features

Rear View
WPS Button
Gigabit LAN
Ports 1-4 (Black)
Power Port
© Copyright 2013 TRENDnet. All Rights Reserved.
USB Share Port
Gigabit Internet
Port (Yellow)
On/Off Power Switch
(EU only)
Reset Button (Located on Bottom)
• USB Share Port – Connect a USB storage device to share files across your
network or connect a USB printer to share printers across your network
(Printer Control Center utility required for printer sharing).
•
WPS Button (Wi-Fi Protected Setup) – Push and hold this button for 5 seconds
to activate WPS. The Power LED will blink when WPS is activated.
• Gigabit LAN Ports 1-4 – Connect Ethernet cables (also called network cables)
from your router LAN ports to your wired network devices.
•
Gigabit Internet Port – Connect an Ethernet cable from your router Internet
port to your modem.
• Power Port – Connect the included power adapter from your router power
port and to an available power outlet.
•
On/Off Power Switch – Push the router On/Off power switch to turn your
router "On" (Inner position) or "Off" (Outer position). Available on EU version
product only.
• Reset Button (Located on Bottom) – Press and hold this button for 10 seconds
to reset the router.
TEW-811DRU
5