TP-Link TL-WR841HP Quick Installation Manual

Quick Installation Guide

300Mbps High Power Router
TL-WR841HP
MODEL NO.
2
Con guration for Windows with Setup Wizard
If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
1 Insert the TP-LINK Resource CD into the CD-ROM drive.
Select TL-WR841HP and click Easy Setup Assistant.
2
7106504243 REV1.0.0

Package Contents

WPS/
RESET 4 3 2 1 INTERNET POWER
TL-WR841HP Power Adapter
Ethernet Cable Resource CD
300Mbps High Power Router
MODEL NO. TL-WR841HP
QIG
3 After con rming the hardware connection and the status
of LEDs, please click NEXT to continue.
After the connectivity is checked successfully, please click
4
NEXT.
1

Hardware Connection

WPS/
RESET 4 3 2 1 INTERNET POWER
3 2
Power o your modem.
1
Connect the INTERNET port on your router to the modem's LAN port with an Ethernet cable.
2
Connect your computer to one of the ETHERNET ports labeled 1~4 on the router with an Ethernet cable.
3
4 Power on the modem and wait for one minute .
5 Plug the provided power adapter into the POWER jack on the back of the router and the other end to a standard electrical wall socket.
Select the connection type your ISP provides and click NEXT.
5
Here we take Dynamic IP for example.
If you are utilizing a cable modem to access the Internet,
6
you may need to clone your MAC address.
Wall Socket
Wall Socket
Cable/DSL Modem
5
4
7 You can rename your wireless network on this page.
The default wireless name is TP-LINK_XXXXXX. Click
NEXT to continue.
You are recommended to select Most Security
8
(WPA2-PSK) to secure your wireless network.
(To be continued)
Internet
The Router is
pre-encrypted.
The default wireless
password, the same
as the PIN code, is
printed on the label
at the bottom of the
Router.