Table of Contents
Advertisement
When there are objects that you do not want to detect with the built-in sensor, a sensor range cap
can be attached to the camera to control the detection range.
There are 4 sensor range caps: the standard cap (attached at the time of purchase), cap 1, cap 2,
and cap 3. Each cap blocks detection to various directions and degrees. Caps can be attached at
45° angles. Select the cap and attachment angle to best suit your needs. See the next page for
details of each cap's detection range.
Note
• Keep the sensor-range caps out of reach of children to prevent swallowing.
Align the cap's tab with the notch in the sensor, then insert the cap.
Note
• Incorrectly inserted caps can affect detection capabilities.
Pinch the edge of the cap to lift it up, then remove it.
Sensor Range Caps (BL-C160 Only)
How to Attach Caps
Notch
How to Remove Caps
2. Remove
Tab
1. Pinch
27
Hide quick links:
Advertisement
Table of Contents
