Protect Your Device Data With Face Unlock - ViewSonic VSD241 User Manual

7.5 Protect Your Device Data with Face Unlock

From Android 4.0 Ice Cream Sandwich, Google had been introduced a new
way to unlock your devices via front camera. The facial recognition unlock
feature called Face Unlock will be an integral part of Android OS. Follow the
steps to get the Face Unlock feature set up on your device:
1
Touch the Home button │ Apps button │ Settings │ Security.
2
Touch Screen Lock section → Face Unlock.
3
On the right half of the display, it will tell you that Face Unlock is not
s secure as other unlock options. Ensure that you have read all the
warning messages and then select Set it up.
4
You'll now be taken to a screen that gives you some hints on how to
setup the photo of your face that will act as the unlocking mechanism
on your device. Take heed and select Continue.
5
You will then see your face by courtesy of VSD241's front camera.
Move a little away from the front camera so your face fits in the
Show Your Face screen. Center your face in the outlined area. You
will receive a Face Captured screen if the Face Unlock setup was
successful and then select Continue.
6
Once the Face Unlock is set to your face, you will be prompted to now
set up a backup lock. In case the device does not recognize you (this
can happen for a bunch of reasons) it will revert to another method
for secure unlocking of the phone. Choose one of the two backup
methods listed; Pattern or PIN. For a Pattern unlock, slide your finger
to connect at least four dots in any pattern of your choosing. Repeat
the pattern to confirm the choice. For a PIN unlock, simply input a four
digit PIN and repeat to confirm.
7
Touch OK to finish the setup.
Protecting Your VSD241 Smart Display
41