General; Audio/Video - D-Link DSM-320 - Wireless Media Player User Manual

Setup (continued)

General

The General option contains a submenu of four options:

Audio/Video

Aspect ratio: The aspect ratio can be adjusted to match the capture settings
of your video clips.
Display mode: Interlace is the default
setting. Progressive scan should only
be selected if your television or monitor
supports this feature.
Video Output: You can select the video
output from this screen or by pressing
the VIDEO OUT button on the remote
control from any screen.
The Composite setting should be
selected for composite or S-Video
connections. If component connectors
are used but not selected, the screen will have a blue tint.
Audio Output: The audio output can be modified from this screen or by pressing
the AUDIO OUT button on the remote control from any screen.
If you are playing audio that has been encoded in 5.1 surround then sound is
in pass-through mode. This means that you cannot adjust the volume on the
remote control or Mute the sound using the remote control. With .1 surround
audio you must control the volume level from your digital tuner/receiver.
Video Seek Mode: You can select either FF/Rev or Jump. FF/Rev is the
standard way of Fast Forwarding or Reversing through an audio/video file.
Selecting Jump will allow you to jump through an audio/video file based on an
increment of time you provide.
8