D-Link DSM-320 - Wireless Media Player User Manual page 39

The DSM-320 Setup Wizard (continued)
Current Wireless Settings
Your current wireless settings
are displayed based on the SSID
you selected in the previous
step. If you chose the enter the
SSID manually, then the default
settings are entered.
SSID
The SSID name selected on the
previous screen appears here.
You can change the SSID you
selected or enter one manually
by pressing the ENTER button
on the remote control with this field highlighted. The on-screen keyboard will
be displayed and you can enter the SSID.
Mode
There are two different modes to select from: Ad-Hoc and Infrastructure Mode.
Ad-Hoc Mode is used for peer to peer wireless networks that do not contain
a router or an access point. Infrastructure Mode is used for networks with an
access point or router. To toggle between the two, press the ENTER button
when Mode is highlighted. The up arrow and down arrow will toggle between
the two options. Press ENTER again to select.
WEP
WEP (Wired Equivalent Privacy) is an industry standard encryption technology
used by wireless devices. There are five options configurable under this setting,
Disable, 64-bit Hex, 128-bit Hex, 64-bit ASCII, and 128-bit ASCII. To toggle
between the options, press the ENTER button when WEP is highlighted. The
up arrow and down arrow will toggle between the three options. Press ENTER
again to select.
Key Index
Select a number between 1 and 4. To toggle between the options, press the
ENTER button when Key Index is highlighted. The up arrow and down arrow
will toggle between the four. Press ENTER again to select.
Key
To connect to an encrypted wireless device, the key you enter here must match
the key of the device exactly. Press the ENTER button on the remote control with
this field highlighted to enter a key. The on-screen keyboard will be displayed
and you can enter the key.