Apm Configuration - Asus V2-AE1 User Manual

5.5.5 5.5.5 5.5.5

APM Configuration

APM Configuration APM Configuration
5.5.5 5.5.5 APM Configuration APM Configuration
Power Management/APM
Restore on AC Power Loss
Resume On Ring
Resume On LAN
Resume On PME#
Resume On KBC
Wake-Up Key
Resume On PS/2 Mouse
Resume On RTC Alarm
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
Power Management/APM [Enabled] Power Management/APM [Enabled]
Power Management/APM [Enabled] Power Management/APM [Enabled] Power Management/APM [Enabled]
Allows you to enable or disable the advanced power management feature.
Configuration options: [Disabled] [Enabled]
Restore On AC Power Loss [Power Off] Restore On AC Power Loss [Power Off] Restore On AC Power Loss [Power Off] Restore On AC Power Loss [Power Off] Restore On AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume On Ring [Disabled] Resume On Ring [Disabled] Resume On Ring [Disabled]
Resume On Ring [Disabled] Resume On Ring [Disabled]
When set to [Enabled], the system enables the RI to generate a wake
event while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume On LAN [Disabled] Resume On LAN [Disabled] Resume On LAN [Disabled] Resume On LAN [Disabled] Resume On LAN [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume On PME# [Disabled] Resume On PME# [Disabled] Resume On PME# [Disabled] Resume On PME# [Disabled] Resume On PME# [Disabled]
When set to [Enabled], the system enables the PME to generate a wake
event while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1 A S U S V i n t a g e 2 - A E 1
BIOS SETUP UTILITY
Power
[Enabled]
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Any Key]
[Disabled]
[Disabled]
Options
Disabled
Enabled
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7