Security Menu - Asus RS161-E4 PA2 User Manual

5.6 Security menu

The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
Main Advanced
Supervisor Password : Not Installed
User Password
Change Supervisor Password
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After
you set a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item, then press <Enter>.
2. From the password box, type a password composed of at least six letters and/or
numbers, then press <Enter>.
3. Confirm the password when prompted.
The message "Password Installed" appears after you successfully set your
password.
To change the user password, follow the same steps as in setting a supervisor
password.
To clear the supervisor password, select the Change Supervisor Password then
press <Enter>. The message "Password Uninstalled" appears.
If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See section "2.6 Jumpers" for information
on how to erase the RTC RAM.
ASUS RS161-E4/PA2
BIOS SETUP UTILITY
Server Security
: Not Installed
Boot Exit
<Enter> to change
password.
<Enter> again to disable
password.
→←
↑↓
+-
Enter
F1
F10 Save and Exit
ESC Exit
Select Screen
Select Item
Change Field
Go to Sub Screen
General Help
5-35