Table of Contents
Advertisement
2.9.4 Power supply module
To uninstall the power supply module:
1. Disconnect all the power cables
connected to the motherboard and
other system devices.
2. Use a Phillips (cross) screwdriver
to remove the screws that secure
t h e f r o n t e n d o f t h e p o w e r
supply.
3. From the rear panel, remove two
screws that secure the power
supply from the chassis.
4. Slide the power supply forward for
about half an inch, then carefully
lift it out from the chassis.
2-22
Chapter 2: Hardware setup
Advertisement
Table of Contents
