Maintenance > Password - D-Link DPR-2000 Manual

Using the Web Configurator
5. Select an Access Right for tha
6. Click Apply Setting to save the setting
without saving, click Cancel.
MAINTENANCE > Password
By default, the User Name of the Print Server i
The Use r Name and Password are used to access the user interface of the Print
Server to set its configurations.
th is default password.
Do as follows to set the password:
1. In the Current Password field, type in the current password (which is also the
default password, if you have never changed it).
2. In the New Password field, type in a new password.
3. In the Confirm Password field, type in the new password again to confirm.
4. Click Apply Settings to save the new password in the Print
exit without saving, click Cancel.
D-Link DPR-2000 - User Manual
t Community Name.
s in the Print Server. To abort and exit
s Admin, and its Password is blank.
The Password screen below allows you to change
Server. To abort and
65