Advanced > Advanced Wireless - D-Link DPR-2000 Manual

Using the Web Configurator
ADVANCED > Advanced Wireless
The Advanced Wireless screen allows you to change the wireless settings of your
infrastructure network, where all wireless signals are transferred through a wireless
router or access point. Note that you should not change these settings unless
instructed to do so by your network administrator.
There are two advanced wireless settings that can be changed:
Beacon Interval: This parameter affects the latency in sending unicast
packets to power saving stations and broadcast/multicast packets in
The default setting is 100, or ten beacons per second. To change this, type in
a new value in this box.
Preamble:
used to communicate to the receiver that data is on its way. Most wireless
routers and access po
setting in your Print Server is Long Preamble. To change this, clic
Once you have completed the settings for each printer port, click Apply Settings to
store the settings. To abort and exit, click Cancel.
D-Link DPR-2000 - User Manual
The Preamble, which is located in eve
ints are configured for a Long Preamble. The default
ry wireless data packet, is
k Short.
general.
59