GE Profile PT7050SFSS Dimensions And Installation Information

9-1/2"
F
PT7050SF
GE Profile Series 30 in. Built-In Single Convection Wall Oven
™
Conduit
40"
Dimensions and Installation Information (in inches)
Most 30" Wall Cabinets can be used with
Conduit
this unit.
D
40"
Note: These ovens are not approved
for stackable installations. Cabinets
installed adjacent to wall ovens must
"
22
have an adhesion spec of at least a 194°F
D
temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
2 x 4 or
equivalent runners
Side-by-side installations require at least 2"
level with bottom of cutout
between cutouts.
and flush with sides of cutout
or solid bottom floor.
KW Rating
240V
4.5
208V
3.4
Breaker Size
240V 20 Amps
208V 20 Amps
MAX.
Junction box
location
Cutout depth
23-1/2" MIN
22" to
bottom of
Junction box
junction box
location
22" to
bottom of
junction box
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
30''
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
Cabinet
C – Overlap of oven at bottom of cutout
A – Overlap of oven at top of cutout
Oven
B – Overlap of oven over side of edges of cutout
D – Overall depth with handle
C – Overlap of oven at bottom of cutout
E – Overall height with trim
Oven
F – Overall width
D – Overall depth with handle
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
Cutout height
B
27-1/4" MIN.
27-5/16" MAX.
C
A
Cutout height
27-1/4" MIN.
Recommended
27-5/16" MAX.
C
cutout location
from floor
23" minimum
Recommended
door opening
cutout location
allowance
from floor
30''
32-1/2"
PT7050
JT5000
JT3000
JT1000
30"
1"
Suitable
3/4"
bracing
1-1/4" to support
runners
27-3/16"
28-3/8"
29-3/4"
or GE appliance
®
service, 800.626.2000.
®
F
E
Conduit
E
40"
D
"
22
32-1/2"
23" minimum
door opening
allowance
PT7050
JT5000
JT3000
PT7050
JT1000
C L
2 x 4 or
30"
equivalent runners
level with bottom of cutout
1"
and flush with sides of cutout
3/4" or solid bottom floor.
1-1/4"
27-3/16"
(must support 200 lbs.)
Suitable
28-3/8"
bracing
(must support 200 lbs.)
to support
29-3/4"
runners
* ADA qualified based
*
on Uniform Federal
Accessibility Standards
Specification Revised 4/13
9-1/2"
MAX.
Cutout depth
23-1/2" MIN
F
Junction box
location
22" to
Conduit
bottom of
40"
junction box
D
B
"
22
C L
2 x 4 or
Cabinet
equivalent runners
level with bottom of cutout A – Overlap of oven at top of cutout
and flush with sides of cutout
B – Overlap of oven over side of edges of
or solid bottom floor.
C – Overlap of oven at bottom of cutout
Oven
D – Overall depth with handle
E – Overall height with trim
F – Overall width
Listed by
Underwriters
Laboratories
220252
9-1/2"
Cutout width
28-1/2" MIN.
28-5/8" MAX
A
C
30''