GE Profile PT7550SFSS Dimensions And Installation Information

Junction box
location
PT7550SF
GE Profile Series 30 in. Built-In Double Convection Wall Oven
™

Dimensions and Installation Information (in inches)

47" to
bottom of
Note: Cabinets installed adjacent to wall
9-1/2"
junction box MAX.
ovens must have an adhesion spec of at least
a 194°F temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Conduit
40"
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
E
Installation Information: Before installing,
consult installation instructions packed with
22"
product for current dimensional data.
KW Rating
240V 7.6
D
208V
5.7
Breaker Size
240V
40 Amps
2 x 4 or
208V 40 Amps
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
28-5/8" MAX.
A
B
Cutout width
Cutout depth
28-1/2" MIN.
23-1/2" MIN
28-5/8" MAX.
Junction box
location
A
B
C
47" to
bottom of
junction box
30''
C
30''
Cabinet
A – Overlap of oven at top of cutout
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
B – Overlap of oven over side of edges of cutout
C – Overlap of oven at bottom of cutout C – Overlap of oven at bottom of cutout
Oven
Oven
D – Overall depth with handle
E – Overall height with trim
D – Overall depth with handle
F – Overall width
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Cutout height
50-1/4" MIN.
without pedestal
Recommended
51-13/16" MIN.
minimum
23" minimum
51-15/16" MAX.
cutout location door opening
with pedestal
allowance
from the floor
12"
Recommended
minimum
cutout location
from the floor
12"
PT7550
JT5500
PT7550
JT3500
PT7550
JT5500
30"
JT3500
Suitable
1" bracing
30"
to support
1"
3/4"
runners
3/4"
1-1/4" 1-1/4"
27-3/16"
52-5/8"
27-3/16"
29-3/4"
52-5/8"
29-3/4"
or GE appliance
®
service, 800.626.2000.
®
F
F
Conduit
40"
E
22"
23" minimum
door opening
allowance
D
C L
2 x 4 or
equivalent runners
level with bottom of cutout
C L
and flush with sides of cutout
or solid bottom floor.
(must support 375 lbs.)
Suitable
bracing
(must support 375 lbs.)
to support
runners
Specification Revised 4/13
9-1/2"
MAX.
Cutout depth
Conduit
23-1/2" MIN
40"
Junction box
location
B
47" to
E
bottom of
junction box
22"
D
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Listed by
Underwriters
Laboratories
220157
Cab
A –
B –
C –
Oven
D –
E –
F –