Shock And Vibration; Reliability; Shock And Vibration Specification - Fujitsu MPA3017AT Product Manual

1.6

Shock and Vibration

Table 1.6 lists the shock and vibration specification.
Vibration (swept sine, one octave per minute)
• Operating
• Non-operating
Shock (half-sine pulse, 11 ms duration)
• Operating
• Non-operating
1.7

Reliability

(1) Mean time between failures (MTBF)
The mean time between failures (MTBF) is 500,000 H or more (operation: 24 hours/day, 7
days/week).
This does not include failures occurring during the first three months after installation.
MTBF is defined as follows:
Total operation time in all fields
MTBF=
number of device failure in all fields
"Disk drive defects" refers to defects that involve repair, readjustment, or replacement. Disk drive
defects do not include failures caused by external factors, such as damage caused by handling,
inappropriate operating environments, defects in the power supply host system, or interface cable.
(2) Mean time to repair (MTTR)
The mean time to repair (MTTR) is 30 minutes or less, if repaired by a specialist maintenance staff
member.
(3) Service life
In situations where management and handling are correct, the disk drive requires no overhaul for
five years when the DE surface temperature is less than 48°C. When the DE surface temperature
exceeds 48°C, the disk drives requires no overhaul for five years or 20,000 hours of operation,
whichever occurs first. Refer to item (3) in Subsection 3.2 for the measurement point of the DE
surface temperature.
Table 1.6

Shock and vibration specification

5 to 300 Hz, 0.5G-0-peak
(without non-recovered errors)
5 to 400 Hz, 4G-0-peak (no damage)
10G (without non-recovered errors)
75G (no damage)
C141-E034-02EN
(H)
1 - 9