Ethernet Connection; Operation - D-Link DNR-326 Quick Installation Manual

Ethernet Connection

Connect an Ethernet cable to the Ethernet port of
your DNR-326. This cable should connect your
DNR-326 to your local network via a router or
switch, or directly to a computer for configuration.
Connecting a UPS (Optional)
If you have a Universal Power Supply (UPS) that
you would like to use with the NVR, you may con-
nect it before powering the unit on.
1. Connect the USB cable from the UPS to the port
on the back of the NVR.
2. Connect the power cable to the UPS. (Ensure
that the UPS is plugged in and receiving power.)

Operation

Power On
Connect the power adapter. Switch the NVR on
and ensure the power LED on the front of the unit
is lit.
Getting Started
1. Make sure the NVR is connected to a network
via a router or a switch, or directly connected
to a PC.
2. Insert the DNR-326 CD in the CD-ROM drive.
If the CD Autorun function does not automati-
cally start on your computer, go to Start > Run.
In the Run box, type D:\autorun.exe (where
D: represents the drive letter of your CD-ROM
drive) and click OK. When the autorun screen
appears, click NVR Search Utility.
3. Highlight an available NVR and click Configu-
ration to access the NVR's web UI. For more
detailed configuration instructions, please refer
to the user manual on the CD-ROM.
Figure 2. DNR-326 NVR Search Utility
Technical Support
United Kingdom (Mon-Fri)
website: http://www.dlink.co.uk
FTP: ftp://ftp.dlink.co.uk
Home Wireless/Broadband 0871 873 3000
(9.00am–06.00pm, Sat 10.00am-02.00pm)
Managed, Smart, & Wireless Switches, or
Firewalls 0871 873 0909 (09.00am- 05.30pm)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri)
All Products 1890 886 899 (09.00am-06.00pm,
Sat 10.00am-02.00pm)
Phone rates: €0.05ppm peak, €0.045ppm off peak
times
D-Link 2-Bay Professional Network Video Recorder  3