Table 7.10 Setting Value Of Scsi Time Monitoring - Fujitsu MCM3064SS Product Manual

DATA phase:
Time taken for completing eight REQ/ACK handshakes (average).
Note:
When timeout is detected, the ODD clears the command being executed and
forces the SCSI bus into the BUS FREE phase (see Section 6.1) in "MCD3130SS,
MCE3130SS, MCK3130SS, MCM3064SS, MCM3130SS Optical Disk Drives
SCSI Logical Interface Specifications."

Table 7.10 Setting value of SCSI time monitoring

Monitoring time in
INFORMATION
TRANSFER phase
About 30 sec
C156-E228-02EN
When the ACK signal is returned repeatedly within an interval of
500 ms or more, timeout may occur even if eight REQ/ACK
handshakes on average had been terminated with the time listed in
Table 7.10.
Monitoring time in
RESELECTION phase
About 250 ms
Number of retries in
RESELECTION phase
10 times
7-39