Ipv6 Configuration; Setting Ipv6 Addresses; Manual Address Configuration - Dell 1130 Laser Mono Printer Troubleshooting Manual

Double-click the Unified Driver Configurator.
1.
Click Add Printer...
2.
The Add printer wizard window opens. Click Next.
3.
Select Network printer and click the Search button.
4.
The printer's IP address and model name appears on list field.
5.
Select your machine and click Next.
6.
Input the printer description and Next
7.
When the add printer is done, click Finish.
8.

IPv6 Configuration

TCP/IPv6 is supported properly only in Windows Vista or higher.
If the IPv6 network seems not working, set all the network setting to the factory defaults and try again. (See
Restoring factory default
To use the IPv6 network environment, follow the next procedure to use the IPv6 address:
The machine is provided with IPv6 feature on.
Connect your machine to the network with a network cable.
1.
Turned on the machine.
2.
Print a Network Configuration Report from the machine's control panel that will check IPv6 addresses.
3.
Select Start > Control Panel > Hardware and Sound > Printers > Add Printer.
4.
Click Add a local printer on the Add Printer windows.
5.
Follow the instruction on the window.
6.
If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by.
Printing network configuration report
You can print a Network Configuration Report from the machine's control panel that will show the current machine's
network settings. This will help you to set up a network and troubleshooting problems.
To print the report:
In ready mode, press and hold the
and IP address.
For example:
MAC Address : 00:15:99:41:A2:78
IP Address : 192.0.0.192

Setting IPv6 addresses

Machine supports following IPv6 addresses for network printing and managements.
Link-local Address: Self-configured local IPv6 address. (Address starts with FE80.)
Stateless Address: Automatically configured IPv6 address by a network router.
Stateful Address: IPv6 address configured by a DHCPv6 server.
Manual Address: Manually configured IPv6 address by a user.

Manual address configuration

Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL. (See
1.
Service (Dell 1130n
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click
Go.
When the Embedded Web Service window opens, click Network Settings.
2.
Click TCP/IP.
3.
Enable the Manual Address In the TCP/IPv6 section.
4.
Select the Router Prefix and click the Add button, then the router prefix will automatically be entered into the
5.
address field.
settings.)
(cancel button) for about 5 seconds. You can find your machine's MAC address
only).)
Using Embedded Web