Fujitsu Eclipse CD1000 Owner's Manual page 26

Other information
Symptoms
Disc cannot be played
back.
Noise is generated.
A longer readout time is
required ("CHECK" keeps
flashing on the display).
Tracks cannot be played
back as you have
intended them to play.
Elapsed playing time is
not correct.
"NO FILES" appears on
the display.
Correct characters are not
displayed (e.g. album
name)..
26
Causes
No MP3/WMA tracks are recorded on the
disc.
MP3/WMA tracks do not have the
extension code <.mp3> or <.wma> in their
file names.
MP3/WMA tracks are not recorded in the
format compliant with ISO 9660 Level 1,
Level 2, Romeo, or Joliet.
The track played back is not an MP3/WMA
file (although it has the extension code
<.mp3> or <.wma>).
Readout time varies due to
the complexity of the folder/
file configuration.
Playback order is determined when the files
are recorded.
This sometimes occurs during play. This is
caused by how the tracks are recorded on
the disc.
The current disc does not contain any MP3/
WMA tracks.
This receiver can only display alphabets
(capital: A - Z), numbers, and a limited
number of symbols
Remedies
Change the disc.
Add the extension code
<.mp3> or <.wma> to their file
names.
Change the disc.
(Record MP3/WMA tracks
using a compliant
application.)
Skip to another track or
change the disc. (Do not add
the extension code <.mp3> or
<.wma> to non-MP3 or WMA
tracks.)
Do not use too many
hierarchies and folders.
————————————
————————————
Insert a disc that contains
MP3/WMA tracks.
————————————