Chapter 1 Introduction; Switch Description - D-Link xStack DGS-3120-48PC Hardware Installation Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch Hardware Installation Guide
Chapter 1

Switch Description

Features
Ports
Front Panel Components
LED Indicators
Rear Panel Description
Side Panel Description
Switch Description
D-Link's DGS-3120 Series is a high performance member of the D-Link xStack
edge switches to core gigabit switches, the xStack
tolerance, flexibility, port density, robust security, and maximum throughput, with a user-friendly management interface
for the networking professional.
The Switch is the latest member of D-Link's entry level Layer 2 managed switch product line.
The Series features the following list of switches:
•
DGS-3120-24TC: 24-Port 10/100/1000Base-T with 4 Combo Copper/SFP ports, L2 Stackable Management
Switch.
•
DGS-3120-24SC: 8-Port 10/100/1000Base-T /SFP combo with 16 SFP ports, L2 Stackable Management
Switch.
•
DGS-3120-24SC-DC: 8-Port 10/100/1000Base-T /SFP Combo with 16 SFP ports, L2 Stackable Management
Switch.
•
DGS-3120-24PC: 24-Port 10/100/1000Base-T with 4 Combo Copper/SFP PoE ports, L2 Stackable
Management Switch.
•
DGS-3120-48TC: 48-Port 10/100/1000Base-T with 4 Combo Copper/SFP ports, L2 Stackable Management
Switch.
•
DGS-3120-48PC: 48-Port 10/100/1000Base-T with 4 Combo Copper/SFP PoE ports, L2 Stackable
Management Switch.
This cost effective Gigabit Switch provides an affordable solution for administrators to upgrade their networks to high
speed Gigabit connections. The dedicated stacking ports offer up to 40G bi-directional bandwidth, which makes the
DGS-3120 Series also suitable as a backbone solution for SMBs. The advanced ACL and user authentication
functions on the Switch extend the network security coverage from core to the edge. A unique D-Link Safeguard
Engine protects the DGS-3120 Series from the threat of worms and viruses, thereby increasing overall reliability,
serviceability, and availability
The Switch has a combination of 1000BASE-T ports and SFP ports that may be used in uplinking various network
devices to the Switch, including PCs, hubs and other switches to provide a gigabit Ethernet uplink in full-duplex mode.
The SFP (Small Form Factor Portable) combo ports are used with fiber-optical transceiver cabling in order to uplink
various other networking devices for a gigabit link that may span great distances.
These SFP ports support full-duplex transmissions and can be used with the following transceivers:
•
DEM-310GT (1000BASE-LX)
•
DEM-311GT (1000BASE-SX)
•
DEM-312GT2 (1000BASE-SX)
•
DEM-314GT (1000BASE-LH)
•
DEM-315GT (1000BASE-ZX)
•
DEM-210 (Single Mode 100BASE-FX)
Introduction
®
switch family has been future-proof designed to provide fault
®
family. Ranging from 10/100Mbps
1