Table of Contents
Advertisement
Radio Function
Radio Function Operation
Press the FM or AM button to enter FM or AM radio mode. Then press the SEEK+/-
button on the remote control or the
seconds to start searching forward/backward from the current frequency. Press the
SEEK+/- button or
/
button again to stop searching. Radio frequency will be
displayed on the display panel. The frequency range of FM is from 87.5MHz to 107.9
MHz, frequency range of AM is from 520 kHz to 1710 kHz.
Fine Tuning
Press the SEEK+/- button on the remote control or the
once to fine tune the frequency forward/backward under radio mode.
Semi-memorizing radio stations
If you like a radio station and want to store it for later listening, press the MENU/SET
on the remote control or the SET button on the front panel to memorize it. "SAVE 00"
will be displayed on the display panel, "00" represents the default station number.
There are two methods to organize the memorized stations:
•
Use the
buttons to adjust the channel number for your preference, and then
press the MENU/SET button or SET button again, the station will be memorized
with the coded station number.
•
Press the MENU/SET button or the SET button again, the station will be
automatically memorized with the default station number in sequence.
You can store radio stations from 0 to 19, total 20FM or 20AM radio stations. If no
buttons are pressed within 3 seconds when pressing the MENU/SET button first time,
the frequency will appear on the display panel again, and the station will not be stored.
Accessing memorized radio stations
•
First use the number buttons on the remote control for input, then press the ENT
button for confirmation to go to the selected radio station directly; Or without
pressing any button and wait a moment, it also goes to the selected radio station.
•
Press the
, buttons on the remote control or front panel to select the radio
stations forward and backward.
When selecting the stations, the "CH 00" will appear on the display panel, where the
"00" is the channel number of the stored radio station. After a few seconds, the "CH
00" disappears and the radio frequency will be displayed once again.
/
button on the front panel for about 1.5
/
button on the front panel
- 16 -
Advertisement
Table of Contents
