Specifications - Insignia NS-DXA2 User Manual

Insignia NS-DXA2 Digital to Analog Converter Box
Problem
Not all channels are
available after performing
an Auto Scan.
How do I find out what
digital TV reception I get in
my area?
No Closed Caption
displayed.
Cannot use the converter
box along with my cable
box.
I forgot my four digit
parental control PIN.

Specifications

Design and specifications are subject to change without prior notice.
Solution
• Adjust your antenna and scan for available channels. Press MENU, then select General
Settings, then Channel Scan.
• To determine which antenna you need for your area, visit www.antennaweb.org. Type in your
address and zip code to find an antenna that will continue giving you free local broadcast
programming.
• Make sure that the channel you are watching carries closed caption information.
• Press the CC button on the remote control to check for closed caption data output.
• The converter box works only with over-the-air broadcast television signals, not cable or any
satellite service.
• Press Menu > Settings > System Reset to reset the code to 1234. Note that this will restore all
settings back to their original factory settings and a new Channel Scan must be done.
RF Input
Demodulation 8VSB
Frequency Range 54 - 860 MHz
Connector Type F-Type x 1
RF Output
Signal Type NTSC
Connector Type F-Type x 1
Video Output
Signal Type NTSC
Impedance 75 Ohms
Output Level 1Vp-p
Connector RCA x 1
Audio Output
Output Left and Right channel
Impedance 600 Ohms (min.)
Output Level 2Vrms±10%@0dBFS
Connector RCA x 2
Front Panel
Remote Control
Power Consumption (Product)
Operation 120VAC, 60Hz, 8W (max.)
Standby <0.8W
AC Adapter Specification
Output 5VDC/2.0A/10W
Dimension (W x D x H)
Weight
www.insigniaproducts.com
IR Receiver
3 Key Function Control
Status LED (power and standby)
27 keys
Input 100~240VAC, 50~60Hz
6.9 x 5.3 x 1.3 in. (175 x 135 x 33 mm)
8.8 oz. (250 g)
23