Set-Up; Gpower Save; Software Installation; The Software Components - FujiFilm FinePixF402 Owner's Manual

g POWER SAVE
SET–UP
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＯＮ ＯＮ
ＰＯＳＴＶＩＥＷ ＰＯＳＴＶＩＥＷ
２ ＭＩＮ ２ ＭＩＮ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ ＤＳＣ ＤＳＣ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ ＳＥＴ
ＯＫ ＢＡＣＫ
Once you enable this function, the monitor is
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 30 seconds. If the camera is then
left unused for a further time (2 minutes or 5
minutes), it is automatically switched off. Use
this function when you want to get the maximum
possible running time from the battery.
G
!
Power Save is disabled when the camera is connected
to a USB port.
N
To restore power to the camera
The Sleep function does not operate when the LCD monitor is switched off or when
the camera is in Setup or Playback mode. However, if the camera controls are not
used for some time (2 minutes or 5 minutes), the camera automatically switches off.
If the camera has been automatically switched off, switch it back on by moving the
2 1
Power switch to the OFF position 1 briefly and then back to ON 2.
74
To bring the camera out of sleep mode so that it
is ready to shoot, press "d", "c", "a" or "b".
This is useful since the camera is ready to shoot
more quickly than when it is switched off and
then on again. You can also take pictures when
the camera is in sleep mode simply by pressing
the shutter button.
G
!
You can also bring the camera out of sleep mode by
pressing buttons other than "d", "c", "a" or "b".
N

6 Software Installation

6.1 The Software Components

USB Mass Storage
Driver
Allows a digital camera to be used
as USB Mass Storage (removable
disk drive, card reader).
Connect the camera
with "DSC" selected as
the USB setting
(➡P.88).
Exif Launcher
Launches the FinePixViewer
software when a camera is
connected.
Connect the camera
with "PC CAM"
selected as the USB
setting (➡P.91).
USB PC Camera
Driver
Allows a digital camera to be
used as a PC Camera.
✽ Note that the software configuration differs slightly depending on your operating system.
FinePixViewer
Allows you to display thumbnail lists of the
images stored on your PC or in the camera,
print the images individually or as an index,
display the images at full size and perform
some basic image processing.
PictureHello
Used for videoconferencing (Windows only)
ImageMixer VCD
for FinePix
Creates a FinePix CD Album.
Acrobat Reader
R R
Software used to read PDF-format documents on a
personal computer. This software is needed to read the
User's Guides for FinePixViewer.
QuickTime
Software needed for playing back movies, etc.
6
75