Using An External Flash; External Flash Settings - FujiFilm FinePix4900 ZOOM Owner's Manual

USING AN EXTERNAL FLASH

PHOTOGRAPHY MENU
1
This mode can be selected in the "
•
photography modes.
Set this setting to "ON" when you are using an
external flash.
G
Synchronization speed :
Up to 1/1000 sec.
G
!
Set the white balance (➡P.64) to AUTO or Custom
White Balance (➡P.72).
N N
Compatible Flash Units
Flash units that can be used with this camera
must meet the following 3 conditions :
G The aperture can be set.
G
External flash synchronization can be used.
G The ISO sensitivity can be set.
70
2
"
• •
➀
Close the built-in flash.
➁
Mount the external flash on the camera's hot
shoe.
G
!
Built-in and external flash units cannot be used at
the same time.
G
➀
3
G
➁
Select " " (➡P.42) or "
• •
However, the use of "
recommended.
G
!
Flash photography cannot be used when continuous
shooting (➡P.59) or auto bracketing (➡P.68) is
selected.
When you are using an external flash, always
specify a fixed aperture setting.
4
AUTO
MODE
" (➡P.44).

External Flash Settings

" or " " mode is
For external flash, refer to the user's manual for
the flash and specify the settings as described
below.
G
Match the settings to the camera aperture
setting.
In " " or " " mode, match the settings to the
aperture measured by the camera.
G
Match the ISO sensitivity setting (➡P.68) to
the setting on the camera.
G Select External Flash mode (TTL mode cannot
be used).
F
ISO
mm
SELECT
3
71