Testing The Audio; Resetting The Settings Of This Unit - Yamaha PJP-25UR - USB VoIP Desktop hands-free User Manual

Testing the audio

Check the audio in the current setting. The audio is
automatically recorded (five seconds) and played back.
You can easily listen to the audio from this unit as a test.
1
In the "PJP-25UR Controller" screen,
click "Detail".
The "Detail" screen appears.
2
Click "Start".
The audio test starts.
If you cancel the audio test, click "Cancel".
Contents of test
Alarm
First
Second
Third
16
Operation
Starts recording
Starts playing back
Finishes the test

Resetting the settings of this unit

Follow the procedure below to reset the settings of this
unit. You can specify whether to keep the settings saved to
the setting numbers.
Note
Please note the followings when you reset the settings of this unit.
• This operation will clear all settings you changed and restore
the factory default values.
• If you reset all settings, the settings saved to the setting numbers
are also cleared.
• You cannot undo the reset operation.
■Resetting all settings
1
In the "PJP-25UR Controller" screen,
click "DETAIL".
The "DETAIL" screen appears.
2
Uncheck the "Don't reset settings
already saved" box.
3
Click "Reset".
All settings are reset to default.
Note
To complete the reset operation, you need to restart this unit in
some cases. If the message to restart this unit appears, follow the
message to restart it.
■Resetting this unit except settings saved
to the setting numbers
1
In the "PJP-25UR Controller" screen,
click "DETAIL".
The "DETAIL" screen appears.
2
Check the "Don't reset settings already
saved" box.
3
Click "Reset".
This unit is reset to default except settings saved to
the setting numbers.
Note
To complete the reset operation, you need to restart this unit in
some cases. If the message to restart this unit appears, follow the
message to restart it.