Updating The Firmware Via A Network - Yamaha PJP-25UR - USB VoIP Desktop hands-free User Manual

Updating the firmware via a
network
Notes
• Firmware update is available only if the computer connecting to
this unit is connected to the Internet. To update the firmware
without connection to the Internet, follow "Updating the
firmware using a local file" (page 19).
• Once the firmware update is started, do not perform any other
operation until the update operation is completed. If the update
operation is interrupted, this unit may become unusable, in
which case you need to return this unit to the factory for repairs.
• Do not remove the USB cable or LAN cable during the
firmware update. Otherwise, this unit could become unusable,
in which case you need to return this unit to the factory for
repairs.
1
In the "PJP-25UR Controller" screen,
click "Check Update".
The "PJP-25UR License Agreement" screen appears.
2
Read the contents of license agreement
carefully, select "Accept all terms of the
license agreement", and then click "OK".
The "PJP-25UR Firmware Update" screen appears.
If you do not agree with the contents of the license
agreement, click "Don't accept the license agreement"
to cancel the firmware update.
3
Select "Download from the network",
and then click "Start".
The firmware version confirmation screen appears.
18
4
Check the latest firmware version, and
then click "OK" to start the firmware
update.
The firmware update starts.
To specify the firmware download URL
This feature is useful in managing the firmware versions
of multiple PJPs.
1
In the "PJP-25UR Firmware Update"
screen, click "Settings".
The "Settings" screen appears.
2
Enter the URL from which to download
the firmware.
y
You can restore the default URL by clicking "Default".
3
Click "OK".
The firmware download URL is set.