When the current load is outside of the ranges listed, but within each specified output current range, the +5-V, +12-V, and +3.3-V outputs are allowed to
regulate at +/–10% of nominal DC voltages.
1
Maximum continuous total DC output cannot exceed 200 W. Maximum
continuous combined load on +5-VDC and +3.3-VDC outputs cannot
exceed 135 W.
2
Peak +12-VDC output power (up to 12 A) does not exceed 15 seconds in
duration. In this condition, the tolerance on the +12-V output is allowed to
be +/–10%.
3
In system applications where +3.3 VDC is not used, these values may be 0 A
without affecting the regulation on the other outputs.
4
The required full load combinations are adjusted so that the total output