Dell D810 - Latitude D820, D830 Series 15.4" WXGA LCD Screen Service Manual page 51

Back to Contents Page
Video Card Assembly
Dell™ Latitude™ D810 Service Manual
Removing the Video Card Assembly
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
1. Follow the instructions in "Preparing to Work Inside the
2. Remove the display assembly.
3. Remove the keyboard.
4. Remove the palm rest.
5. Loosen the four M2.5 corner screws (marked with a triangle on the thermal-cooling assembly) from the video card assembly. These screws connect the
video-card thermal-cooling assembly to the system board.
1 M2.5 x 5-mm corner
screws
2 video card assembly
6. Lift the video card assembly straight up and out of the computer.
Back to Contents Page
Computer."