Advertisement
3. FAQ/Troubleshooting
My LCD Rack Console doesn't appear to be on.
Make sure that the power switch located at the front of the LCD drawer is in the "on"
position and that the power cable is properly plugged in.
Do I have to install any software to use the LCD Rack Console?
No, the LCD Rack Console does not require any drivers or software to be installed in
your servers. Simply connect the LCD Rack Console directly to a server or KVM switch
and it is ready for use.
Belkin Tech Support
US: 800-223-5546 ext. 2263
310-898-1100 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand: 0800 235 546
Belkin Corporation
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
FAQ/Troubleshooting
4
OmniView
17"
®
LCD Rack Console
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
P75057
OmniView
17"
®
LCD Rack Console
Control your rack servers from a compact 1U
Control
rack console
Start Here
����
����
Quick Installation Guide
F1DC100R
Advertisement
