Table of Contents
Advertisement
Quad mode: Monitor displays video from all cameras on a single screen in 4 quadrants. Any
•
channel that does not have a camera is blank.
Single mode: Monitor displays video from one camera at a time.
•
Scan mode: Monitor displays video from one camera at a time, but cycles through all cameras
•
one by one.
Use
to cycle through these modes.
CH► or CH◄
Your system comes with a single camera; therefore, it only displays in Single mode in Live
view or a single quadrant in Quad view.
Common operations
To...
Change between quad
view, single view, and scan
for Live view
Check the temperature
Turn on the night light
Set the date and time
Set the room temperature
range for the temperature
alert
Use the Lullaby function
Adjust UBR223 volume
Use the Intercom
Do This...
Press
to cycle through the Live modes in the following order:
CH►
CAM1—CAM2—CAM3—CAM4—QUAD—AUTO Scan — CAM1
The temperature displays on the monitor screen when the camera is
in full screen mode. See page 21.
Press
on the side of the camera (page 11) or on the
NIGHT LIGHT
monitor (page 13). See page 28 for details.
See page 19.
See page 22.
See page 28.
Press ▲
(increase volume) or ▼
Vol
the camera or the monitor.
1. Press and hold
2. Speak into the microphone.
3. Release to hear reply.
(decrease volume) on either
Vol
on the monitor.
TALK
17
Advertisement
Table of Contents
