Connecting To A Video Source For Sound - Epson PowerLite 4650 Manual

Note: The location of the port may differ depending on the projector model.
Parent topic:
Related tasks

Connecting to a Video Source for Sound

Connecting to a Video Source for Sound
You can play sound through the projector's speaker system if your video source has audio output ports.
If you are projecting video using the Computer or BNC ports, connect the projector to the video source
using an optional stereo 3.5 mm mini-jack audio cable.
If you are projecting video using the Video or S-Video port, connect the projector to the video source
using an RCA audio cable.
Note: If you connected your video source to the projector using an HDMI cable, the audio signal is
transferred with the video signal; you do not need an additional cable for sound.
1. Connect the audio cable to your video source's audio-out ports.
2. Do one of the following:
• Connect the other end of the cable to the projector's Audio port that corresponds to the
Computer or BNC port you are using for video.
• Connect the red and white plugs on the other end of the cable to the projector's Audio L-R ports.
Parent topic:
Connecting to Video Sources
Connecting to Video Sources
39