Setting A Password - Epson PowerLite 4650 Manual

Parent topic:

Setting a Password

To use password security, you must set a password.
1. Hold down the Freeze button on the remote control until you see the menu. This takes about five
seconds.
2. Press the down arrow to select Password and press Enter.
You see the prompt "Change the password?".
3. Select Yes and press Enter.
4. Hold down the Num button on the remote control and use the numeric buttons to set a four-digit
password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
You see the message "Password accepted."
Projector Security Features
105