Replacing The Remote Control Batteries - Epson PowerLite 4650 Manual

5. Select Yes and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic:
Related tasks
Replacing the Lamp

Replacing the Remote Control Batteries

The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Open the battery cover as shown.
2. Remove the old batteries.
Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on
your hands. If it gets on your hands, wash them immediately to avoid injury.
Projector Lamp Maintenance
152