Epson PowerLite 4650 Manual page 131

Setting
Projection
Operation
A/V Settings
Standby Mode
Options
Front
Front/Ceiling
Rear
Rear Ceiling
—
A/V Output
Monitor Out
Audio Settings
Communication On
Communication Off
131
Description
Selects the way the projector
faces the screen so the image is
oriented correctly
See the last table in the topic
Selects various audio and video
output settings
A/V Output: select this setting to
output audio and video to an
external device when the
projector is in standby mode
(Standby Mode must be turned
on to use this setting)
Monitor Out: Select the image
source to output to an external
device when the projector is in
standby mode. When set to
Auto, an analog RGB signal from
the Computer or BNC port is
output depending on which
source was selected when the
projector went into standby
mode.
Audio Settings: Selects audio
source to output
Enable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)