Western Digital WDBLVH0160KBK User Manual page 93

4. Click Create this target from an existing image file to create a target from an
existing image file.
Note: Use this step only if you have an existing iSCSI target image file.
a. Select the ... button.
b. On the "Image file to use:" window, navigate to the location of your target image file,
then click Open.
5. Select the security type for your target.
 None: Does not assign security for your target.
 CHAP: Assigns Challenge Handshake Authentication Protocol (CHAP) security to
your target.
-
If you'd like to change your User Name, click Edit. Note that the name must match
your initiator CHAP name.
-
Enter your Target Secret. The Target Secret is a security key that must be between
12 to 16 alphanumeric characters.
6. Click Create Target.
Edit an iSCSI Target
1. On the iSCSI Tasks pane, click Edit Target Settings.
2. Modify the required and optional settings as desired.
3. Click Modify Target.
WD SENTINEL RX4100
ADMINISTRATOR AND MAINTENANCE GUIDE
MANAGING ISCSI STORAGE
87