Create An Iscsi Target - Western Digital WDBLVH0160KBK User Manual

Setting
Alias
Status
Security
Size
Server Capacity

Create an iSCSI Target

To create an iSCSI Target that can be used in the WD Sentinel RX4100 server:
1. Click Create an iSCSI Target in the ISCSI Tasks pane. The New iSCSI Target window
appears.
2. In the Alias field, enter an alias for your target. The alias should be a descriptive name for
your target.
3. In the Size field, enter the size of your target, then select the unit of information (e.g. KB,
MB, GB, TB) from the pull-down menu.
Note: Available space displays to the right of this field.
WD SENTINEL RX4100
ADMINISTRATOR AND MAINTENANCE GUIDE
Description
The user-friendly name used as an additional descriptive
name for the target.
The status of your target.
• xx initiators connected.
• Disabled
The assigned security for the target.
• None: No security has been assigned to this target
• CHAP: Challenge Handshake Authentication
Protocol (CHAP) security has been assigned to the
target.
The size of the target (e.g., 4, GB, 1 TB)
Displays the total amount of space on your server and how it
is distributed (i.e., available server space; used server space).
MANAGING ISCSI STORAGE
86