Western Digital WDBLVH0160KBK User Manual page 81

8. The recovery application on the DVD prepares the USB drive. This process can take up
to 15 minutes to complete.
After the USB drive preparation is done, the Start your server in recovery mode screen
displays.
9. Follow the additional instructions that appear on the screen to guide you through the
recovery process:
a. Shut down the WD Sentinel server.
b. Connect a monitor to the server if one is not already connected.
c. Insert the USB flash drive into one of the server's USB ports.
WD SENTINEL RX4100
ADMINISTRATOR AND MAINTENANCE GUIDE
USING THE WD SENTINEL SERVER'S FEATURES
75