Table of Contents
Advertisement
7.
Gently lift the power supply out of the unit.
8.
Insert the replacement power supply into the unit.
9.
Insert and tighten the two (2) screws holding the power supply to the bottom of the
unit.
10. On the back of the unit, insert and tighten the two (2) screws holding the power supply
in place.
11. Reconnect the power cable to the server.
12. Replace the unit cover.
13. Connect the A/C power cord to the unit.
14. Restart the server.
WD SENTINEL RX4100
ADMINISTRATOR AND MAINTENANCE GUIDE
APPENDIX
101
- Quick Links:
- Technical Specifications
Hide quick links:
Advertisement
Table of Contents
