Assembling The Rack - Yamaha RS502 Owner's Manual

Assembling the Rack

Lay the main frame down on a solid, level surface and loosen the screws in clamps q and w using the
1.
tuning key.
Clamp q
Tuning key
NOTE
The tuning key can be found in the pad set package.
Loosen the bolts on clamps q, w, and e and move the clamps all the way down to the center strut.
2.
Following this, lightly tighten the clamp bolts.
Clamp q
Clamp e
Take the left arm from the package and loosen the screw in clamp r using the tuning key.
3.
The left and right arms look very alike, but the left arm is longer. Take care not to mix them up when
assembling the rack.
Screw
Clamp w
Center strut
Left arm
Screw
Screw
Clamp r
Clamp w
Tuning key
Loosen
Bolt
Lightly
tighten
RS502 Owner's Manual
5