Yamaha RS502 Owner's Manual page 10

2.
Attach a tom holder to each of the three tom clamps.
CAUTION
Take special care with tom holders as they have sharp tips that could cause injury.
2-1.
Loosen the bolt on the tom clamp.
2-2.
Insert the tom holder.
2-3.
Securely tighten the bolt on the tom clamp.
3.
Attach a cymbal holder to each of the two cymbal clamps.
 On the left arm
Cymbal holder
Bolt
3-1.
Loosen the bolt on the cymbal clamp.
3-2.
Insert the cymbal holder.
3-3.
Securely tighten the bolt on the cymbal clamp.
NOTE
When tightening the bolt, ensure that the black sleeve is positioned inside the clamp's mounting hole and securely held.
10
RS502 Owner's Manual
Tom holder
Bolt
Sleeve (black)
Cymbal clamp
Tom clamp
 On the right arm
Sleeve (black)
Cymbal clamp
Cymbal holder
Bolt