Adding Or Replacing Memory Modules - HP ProBook 6565b Getting Started Manual

2. Tighten the upgrade bay screw (2).
3. Replace the bottom cover (see
4. Insert the battery (see
5. Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
6. Turn on the computer.

Adding or replacing memory modules

The computer has one memory module compartment. The capacity of the computer can be upgraded
by adding a memory module to the vacant expansion memory module slot or by upgrading the
existing memory module in the primary memory module slot.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
CAUTION:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
NOTE: To use a dual-channel configuration when adding a second memory module, be sure that
both memory modules are identical.
NOTE: The primary memory is located in the bottom memory slot and the expansion memory is
located in the top memory slot.
Inserting or removing the battery on page
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning
To prevent information loss or an unresponsive system:
Replacing the bottom cover on page 34).
32).
Adding or replacing memory modules 41