Replacing A Drive In The Upgrade Bay; Replacing A Hard Drive - HP ProBook 6565b Getting Started Manual

3. Tighten the hard drive screws (4).
4. Replace the bottom cover (see
5. Insert the battery (see
6. Connect AC power and external devices to the computer.
7. Turn on the computer.

Replacing a drive in the upgrade bay

The upgrade bay can hold either a hard drive or an optical drive.

Replacing a hard drive

CAUTION:
Shut down the computer before removing the hard drive from the upgrade bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
To remove a hard drive from the upgrade bay:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect all external hardware devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the upgrade bay toward you.
6. Remove the battery (see
7. Remove the bottom cover (see
Inserting or removing the battery on page
To prevent information loss or an unresponsive system:
Inserting or removing the battery on page
Replacing the bottom cover on page
Removing the bottom cover on page
34).
32).
32).
34).
Replacing a drive in the upgrade bay 37