10 Maintenance; Adding Or Replacing Memory Modules - HP probook 430 G2 User Manual

Hide thumbs Also See for probook 430 G2:
Table of Contents

Advertisement

10 Maintenance

Adding or replacing memory modules

The computer has one memory module compartment. The capacity of the computer can be upgraded
by adding a memory module to the vacant expansion memory module slot or by upgrading the
existing memory module in the primary memory module slot.
NOTE:
Before adding or replacing a memory module, make sure the computer has the most recent
BIOS version, and update the BIOS if needed. See
CAUTION:
memory module may result in various system problems.
WARNING!
cord and remove all batteries before installing a memory module.
CAUTION:
procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
CAUTION:
Shut down the computer before adding or replacing memory modules. Do not remove a memory
module while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
NOTE:
To use a dual-channel configuration when adding a second memory module, be sure that
both memory modules are identical.
NOTE:
The primary memory is located in the bottom memory slot and the expansion memory is
located in the top memory slot.
To add or replace a memory module:
1.
Save your work and shut down the computer.
2.
Disconnect AC power and external devices connected to the computer.
3.
Remove the battery (see
4.
Remove the service door (see
5.
If you are replacing a memory module, remove the existing memory module:
a.
Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
Failure to update the computer to the latest BIOS prior to installing or replacing a
To reduce the risk of electric shock and damage to the equipment, unplug the power
Electrostatic discharge (ESD) can damage electronic components. Before beginning any
To prevent information loss or an unresponsive system:
Removing a battery on page
Updating the BIOS on page
Removing the service door on page
72.
41).
49).
Adding or replacing memory modules
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents