Speakers - HP ProBook 4525s - Notebook PC Maintenance And Service Manual

Speakers

Description
For use in computers with 15.6-in displays
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the power button cable from the system board (see
Remove the speakers from the 15.6-in computer:
1. Remove the two PM2.5x6.0 screws (1) that secure the speakers to the top cover.
2. Disconnect the speaker cable connector (2) from the system board.
3. Remove the cables from the routing channels and the speakers (3) from the computer.
Battery on page 45).
Spare part number
598685-001
Power button board on page
Component replacement procedures
53).
55